KNX motion sensor for ceiling mounting

FF Series - 71 Series - 20venti Series - Signum

CODE: EK-DG2-TP

Description

KNX motion sensor for ceiling mounting. 2 lighting channels (with constant brightness control), 2 HVAC channels and 1 alarm channel. Orientation light (standby). Control parameters can be set via ETS or dedicated IR remote control. Input for On/Off and dimming by KNX button. Power supply via bus. Use in home and building automation systems to KNX standard.

Detection range 3/6/12 m.

Functions / Features
  • 2 channels for lighting, 2 channels for HVAC, 1 channel for alarm
  • Semi-automatic or fully automatic operation
  • 360° detection range
  • Measuring range from 10 to 2000 Lux
  • Settable sensitivity
  • Brightness sensor with bus output
  • Protruding prismatic lens (max. projection 15 mm)
  • Installation height approx. 2-5 m
  • Built-in depth: with cover 84 mm
  • Programming button on front panel
  • Optional IR remote control
Configurationa and commissioning

A detailed description of the parameters can be found in the device's application manual. ETS5 or later is required for configuration and commissioning. Application program for ETS: APEKDF2TP##.knxprod or APEKDG2TP##.knxprod (## = version).

Download
Datasheet - v.2.0 (17/03/2023)
Instructions - v.2 (17/03/2023)
Application manual - v.1.4 (17/03/2023)
Application software for ETS - v.0.1 (20/02/2020)
Drawing
KNX certification
close
Questo sito o gli strumenti terzi da questo utilizzati si avvalgono di cookie necessari al funzionamento ed utili alle finalità illustrate nella cookie policy. Se vuoi saperne di piú o negare il consenso a tutti o ad alcuni cookie, consulta la sezione cookies. Chiudendo questo banner, scorrendo questa pagina, cliccando su un link o proseguendo la navigazione in altra maniera, acconsenti all'uso dei cookie.