Room temperature controller E72 and 8-fold pushbutton with backlit text/symbols and proximity sensor for 2-fold plate

20venti Series

CODE: EK-E72-TP | EK-E20-TP-8T-P

  • Room temperature controller E72 and 8-fold pushbutton with backlit text/symbols and proximity sensor for 2-fold plate
  • Room temperature controller E72 and 8-fold pushbutton with backlit text/symbols and proximity sensor for 2-fold plate
  • Room temperature controller E72 and 8-fold pushbutton with backlit text/symbols and proximity sensor for 2-fold plate
  • Deep
  • Surface
DESCRIPTION

KNX room temperature controller and 8-fold KNX pushbutton (max. 8 independent functions) with integrated room temperature controller. To be used in KNX installations for home and building automation. Measuring of temperature through integrated sensor. User interface with backlighted LCD and four capacitive pushbuttons.

Mounting on round or square wall boxes. Powered by the bus line. Terminal block for bus, screws and mounting support included in the delivery.

Possibility of mounting with 2-fold plates EK-D2S-... EK-S2S-...

FUNCTIONS / FEATURES

ROOM TEMPERATURE CONTROLLER

  • Measurement of temperature with integrated sensor with the possibility of sending the value ​​on the bus
  • 2 points (ON / OFF) or proportional (PWM or continuous) room temperature regulation
  • Heating and cooling modes with the possibility of switching locally or via bus
  • Operating modes: comfort, standby, economy and building protection with separate setpoints for heating and cooling
  • Automatic switching of the operating mode depending on presence or opening windows
  • Weighted average of the two temperature values
  • Display of temperature (measured, setpoint, external in °C or °F), alarms and errors (with alphanumeric coding)
  • Reporting the opening of windows

 

PUSHBUTTON

  • 8 fold version (possibility to configure up to 8 independent functions) 
  • RGB LED for each freely programmable button 
  • Integrated temperature sensor 
  • Integrated proximity sensor
  • Room thermostat function 
  • Plastic casing 
  • Connection to bus line with KNX terminal block 
  • Wall-mounting installation on round or square wall box 
  • IP20 protection degree (installed) 
  • 30 Vdc power supply by KNX bus
CONFIGURATION AND COMMISSIONING

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS4 or later versions. ETS application program: APEKE72TP##.knxprod (## = versione) - APEKE20TP##.knxprod (## = release).

CONFIGURE YOUR PRODUCT

Do you want to continue configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner