Multisensor T - U.R. - CO2 eq. and 8-fold pushbutton with led for 2-fold plate

20venti Series

CODE: EK-ET2-TP | EK-E20-TP-8L

  • Multisensor T - U.R. - CO2 eq. and 8-fold pushbutton with led for 2-fold plate
  • Multisensor T - U.R. - CO2 eq. and 8-fold pushbutton with led for 2-fold plate
  • Multisensor T - U.R. - CO2 eq. and 8-fold pushbutton with led for 2-fold plate
  • Deep
  • Surface
DESCRIPTION

KNX bus device for detection of temperature, relative humidity and CO2 equivalent concentration values of the air mass and 1-, 2- or 4-fold KNX pushbutton (max. 8 independent functions) with integrated room temperature controller. Temperature regulator function for a room or zone, function of thresholds for relative humidity and CO2 concentration regulator.

Frontal LEDs for indication if the device is in heating, cooling, dehumidification or CO2 threshold mode. Mounting on round or square wall box. Powered by the bus line. Terminal block for bus, screws and mounting support included in the delivery.

Possibility of mounting with 2-fold plates EK-D2S-... EK-S2S-...

FUNCTIONS / FEATURES

MULTISENSOR

  • Integrated temperature and relative humidity sensors
  • Integrated VOCs (Volatile Organic Compounds) sensor with output signal for CO2equivalent
  • Room thermostat function
  • Threshold regulator function for relative humidity and CO2
  • LEDs for heating, cooling, dehumidification or CO2 threshold mode indication

 

PUSHBUTTON

  • 8 fold version (possibility to configure up to 8 independent functions) 
  • RGB LED for each freely programmable button 
  • Integrated temperature sensor 
  • Room thermostat function 
  • Plastic casing 
  • Connection to bus line with KNX terminal block 
  • Wall-mounting installation on round or square wall box 
  • IP20 protection degree (installed) 
  • 30 Vdc power supply by KNX bus
CONFIGURATION AND COMMISSIONING

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKET2TP##.knxprod (## = versione) - APEKE20TP##.knxprod (## = release).

CONFIGURE YOUR PRODUCT

Do you want to continue configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner