Kit 30 with network analyser and Rogowski coils

DIN-Rail mount modules

CODE: EK-MEK-30

Description

The kit Ekinex® EK-MEK includes a EK-ME1-MDE network analyzer (enhanced version) and three sensors for measurement and recording of Rogowski current. Sensors are available with the following lengths: 300, 450 and 700 mm.

Rogowski coils
Transducer
  • Coil length: 30, 45 or 70 cm
  • Wire diameter: 8,3 ± 0,2 mm
  • Closing: bayonet
  • Weight: from 150 to 500 g
  • Material: thermoplastic UL94-V0
Electrical features
  • Output level (RMS): 100 mV / 1 kA @50Hz (standard)
  • Transducer resistance: from 70 to 900 Ω
  • Position error: less than ±1% of reading (with wire diameter = 15 mm)
  • Frequency: around 40 Hz at 20 kHz
  • Operating voltage: 1000 VRMS CAT III, 600 VRMS CAT IV
  • Pollution degree 2
  • Test voltage: 7400 VRMS / 1 min
Connection wires
  • Type: 2 x 0,15 mm shielded
  • Length: 300 cm
Delivery

Delivery includes a network analyzer and 3 Rogowski coils.

Functions / Features
  • Fully bidirectional four quadrants measurements for all energies and powers
  • Main electrical parameters measured and displayed for a cost effective consumption analysis
  • Version for 1 or 5A CT
  • 8 MB for data recording
  • Possibility to record MIN / AVG / MAX for instantaneous parameters
  • Possibility to record all energy counters
  • Modbus RTU / ASCII communication by RS485 port
  • Possibility to manage the instrument in remote mode by WintoolNETME1 software
 
Main features
  • Network analyzer
  • Plastic casing
  • Backlighted LCD-Display , 43 x 29 mm 3 rows, 4 digits + symbols
  • Keyboard: 3 front buttons + 1 protected button
  • Screw terminal blocks connection
  • Installation on 35 mm DIN rail (according to EN 60715)
  • 4 modular units (1 MU = 18 mm)
  • Protection degree IP20 (installed device)
  • Weight 260 g
Configurationa and commissioning

Not necessary

STEKME1MDB_EN_EKINEX_SPA
STEKROG_EN_EKINEX_SPA
FISPME1BEIEDFX0_EKINEX_SPA
FISPROGIEDFEXX0_EKINEX_SPA
MAEKME1MD_EN_EKINEX_SPA
TCEKMEKxx_IT_EKINEX_SPA
DQEKME1MDE
WintoolNETME1_v2.6_Setup
Questo sito o gli strumenti terzi da questo utilizzati si avvalgono di cookie necessari al funzionamento ed utili alle finalità illustrate nella cookie policy. Se vuoi saperne di piú o negare il consenso a tutti o ad alcuni cookie, consulta la sezione cookies. Chiudendo questo banner, scorrendo questa pagina, cliccando su un link o proseguendo la navigazione in altra maniera, acconsenti all'uso dei cookie.