Card holder

Hotel solutions


  • Card holder Card holder
  • Card holder Card holder
  • Card holder Card holder
  • Card holder Card holder
  • Card holder Card holder
  • Card holder Card holder
  • Form
  • Flank
  • 'NF
  • Deep
  • Surface
  • 3D view

The Ekinex® EK-TH2-TP card holder with RFID technology is used for presence detection in combination with the EK-TR2-TP card reader. It is equipped with a bistable relay (4A@24Vac/dc), an input for potential-free contacts and a front signalling LED (white). The device has an integrated KNX bus communication module and is designed for mounting in a flush-mounted wall box; it is supplied with SELV voltage via the KNX bus and requires a 12-24 Vac/dc auxiliary power supply.

Technical data
  • 30 Vdc power supply via KNX bus
  • Auxiliary power supply 12-24 Vac/dc
  • Current consumption from bus < 10 mA

The scope of supply includes a terminal for connection to the bus line, a plastic bracket for mounting on a round or square box (hole spacing 60 mm) and two pairs of screws.

  • Smart-card EK-TCE-10 (Ekinex® logo in black, pack of 10 cards) or EK-TCC-10 (customised with customer logo, pack of 10 cards)
  • square plate with 45 x 45 mm window
  • plastic adapter
Functions / Features
  • Presence detection via bus and communication to supervisory system via KNX TP bus (twisted pair)
  • Presence enabling after insertion of card in front pocket
  • Accommodation guest management based on reservation and check-in/check-out period; service user management based on time slots and passe-partout
  • Programmable output based on card validation or as actuator activated by KNX telegrams Delay on card withdrawal configurable for courtesy light management
  • Binary input available for connection of conventional push button (with switching, dimming or roller shutter/shutter function) or signalling contact (e.g. window opening)
  • Front white LED: flashing signal when card not inserted, off when card inserted; LED control via KNX bus telegrams possible
  • Notification of detected presence events to supervisory system with memory buffer
  • Plastic case
  • Connection to bus line via KNX terminal
  • Recessed wall mounting on round box
  • Degree of protection IP20 (installed)
  • Weight approx. 50 g (with mounting bracket)
Configurationa and commissioning

The ekinex accédo software, dedicated to the management of accommodation and hospitality facilities (hotels, residences, guest houses or bed&breakfasts), is required for the programming of access control functions and card programming.

Do you want to configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner
Questo sito o gli strumenti terzi da questo utilizzati si avvalgono di cookie necessari al funzionamento ed utili alle finalità illustrate nella cookie policy. Se vuoi saperne di piú o negare il consenso a tutti o ad alcuni cookie, consulta la sezione cookies. Chiudendo questo banner, scorrendo questa pagina, cliccando su un link o proseguendo la navigazione in altra maniera, acconsenti all'uso dei cookie.