8-fold pushbutton with backlit text/symbols, proximity sensor and card reader for 2-fold plate (60x45 mm module)

Hotel solutions

CODE: EK-E20-TP-8T-PN | EK-TR2-TP

  • 8-fold pushbutton with backlit text/symbols, proximity sensor and card reader for 2-fold plate (60x45 mm module) 8-fold pushbutton with backlit text/symbols, proximity sensor and card reader for 2-fold plate (60x45 mm module)
  • 8-fold pushbutton with backlit text/symbols, proximity sensor and card reader for 2-fold plate (60x45 mm module) 8-fold pushbutton with backlit text/symbols, proximity sensor and card reader for 2-fold plate (60x45 mm module)
  • 8-fold pushbutton with backlit text/symbols, proximity sensor and card reader for 2-fold plate (60x45 mm module) 8-fold pushbutton with backlit text/symbols, proximity sensor and card reader for 2-fold plate (60x45 mm module)
  • Deep
  • Surface
  • 3D view
Description

The Ekinex® 20venti series 8-fold pushbutton is used for on/off control of utility devices, dimming of luminaires, control of motorized drives for roller shutters or other programmable control functions. Thanks to the integrated temperature sensor, the button can act as a temperature controller for a room or zone. RGB LED for each rocker. The switch has an integrated KNX bus communication module and is designed for installation in a flush-mounted wall box.

Technical data
  • 30 Vdc power supply by KNX bus
  • Current consumption from bus < 17 mA
Delivery

Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

  • 8 rectangular 30 x 15 mm plastic rockers with or without backlit text/symbol
  • double plate of the Deep and Surface version with 60 x 45 mm window
  • a plastic adapter
  • a metal support for installation onto round or square mounting box (fixing holes 71 mm apart)
Card reader

The Ekinex® EK-TR2-TP card reader with RFID technology is used for access control in combination with the EK-TH2-TP card pocket. It is equipped with a bistable relay (4A@24Vac/dc), an input for potential-free contacts and a 3-colour (white, green and red) front signalling LED. The device has an integrated KNX bus communication module and is designed for flush-mounting in a wall-mounting box; it is supplied with SELV voltage via the KNX bus and requires a 12-24 Vac/dc auxiliary power supply.

Technical data
  • 30 Vdc power supply via KNX bus
  • Auxiliary power supply 12-24 Vac/dc
  • Current consumption from bus < 10 mA
Delivery

The scope of supply includes a terminal for connection to the bus line and two pairs of screws.

Accessories

Smart-card EK-TCE-10 (Ekinex® logo in black, pack of 10 cards) or EK-TCC-10 (customised with customer logo, pack of 10 cards)

Functions / Features
Pushbutton
  • 8 fold version (possibility to configure up to 8 independent functions) 
  • RGB LED for each freely programmable button 
  • Integrated temperature sensor 
  • Integrated proximity sensor
  • Room thermostat function 
  • Plastic casing 
  • Connection to bus line with KNX terminal block 
  • Wall-mounting installation on round or square wall box 
  • IP20 protection degree (installed) 

 

Card reader
  • Access control via KNX bus TP (twisted pair)
  • Access authorisation following validation of the card
  • Accommodation guest management based on reservation and check-in/check-out period; management of service users based on time slots and passe- partout
  • Programmable output for activation of electric lock or as simple actuator activated by KNX telegrams
  • Signalling of validation in progress (green LED) or unauthorised card (red LED); possibility of activation for "do not disturb" or "room make-over" commands
  • Notification of validation events to supervisory system with memory buffer
  • Plastic case
  • Connection to bus line via KNX terminal
  • Recessed wall mounting on round box
  • Degree of protection IP20 (installed)
  • Weight approx. 50 g (with mounting bracket
Configurationa and commissioning

The ekinex accédo software, dedicated to the management of accommodation and hospitality facilities (hotels, residences, guest houses or bed&breakfasts), is required for the programming of access control functions and card programming

Do you want to configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner
STEKE2ETP4_EN
  • v. 1.0 (01/03/2024)
  • PDF | 2 MB
  • Download
FISPTR2TP2TH2TPIEXX00
FISPE2ETP48IEX00
  • v. 1 (01/03/2024)
  • PDF | 1,3 MB
  • Download
MAEKTR2TP2TP_EN_V1.1.0_2019_01_14
MAEKE2ETP4_EN
  • v. 1.1 (08/05/2024)
  • PDF | 4,1 MB
  • Download
APEKTRTPTH2TP
APEKE20-E2E-TP4-8
  • v. 0.1 (01/03/2024)
  • ZIP | 2,2 MB
  • Download
DSEKE20TP8TPTR2
CEEKE2ETP48
  • v. 1.0 (22/01/2024)
  • PDF | 845,5 KB
  • Download
KNX_Certification_EK-E20-TP-8T-PN
  • v. 5.0 (01/08/2023)
  • PDF | 774,4 KB
  • Download
MAEKACCSW_EN_V1.3.0

NEW DELÉGO AND DELÉGO PANELS
Presentation of the new Delégo Server, new hardware with four times the performance, new also on the graphic interface, now even more flexible and configurable. Also new on the Delégo Panels, new Ekinex App Store to be able to easily download third-party apps to the panels.

CALENDAR
SIGN UP
26.09.2024   |   9:00 - 10:00   |   EN
close
Questo sito o gli strumenti terzi da questo utilizzati si avvalgono di cookie necessari al funzionamento ed utili alle finalità illustrate nella cookie policy. Se vuoi saperne di piú o negare il consenso a tutti o ad alcuni cookie, consulta la sezione cookies. Chiudendo questo banner, scorrendo questa pagina, cliccando su un link o proseguendo la navigazione in altra maniera, acconsenti all'uso dei cookie.