Pushbutton
- 4-fold (possibility to configure up to 8 independent functions)
- 4 freely programmable LED for each channel
- 2 colour combination available for the LED (blue / green or red / white)
- Room thermostat function
- Integrated temperature sensor
- Plastic casing
- Connection to bus line with KNX terminal block
- Frontal programming pushbutton and LED
- Wall-mounting installation on round or square wall box
- IP20 protection degree (installed)
- Weight 70 g (with mounting support)
Card holder
- Presence detection via bus and communication to supervisory system via KNX TP bus (twisted pair)
- Presence enabling after insertion of card in front pocket
- Accommodation guest management based on reservation and check-in/check-out period; service user management based on time slots and passe-partout
- Programmable output based on card validation or as actuator activated by KNX telegrams Delay on card withdrawal configurable for courtesy light management
- Binary input available for connection of conventional push button (with switching, dimming or roller shutter/shutter function) or signalling contact (e.g. window opening)
- Front white LED: flashing signal when card not inserted, off when card inserted; LED control via KNX bus telegrams possible
- Notification of detected presence events to supervisory system with memory buffer
- Plastic case
- Connection to bus line via KNX terminal
- Recessed wall mounting on round box
- Degree of protection IP20 (installed)
- Weight approx. 50 g (with mounting bracket)