• New

KNX Secure card holder

CODE: EK-TI2-TP-B | EK-TI2-TP-W (coming soon)

  • Form
  • Flank
  • 'NF
  • Deep
  • Surface
  • Black
  • White
3D
Description

The EK-TI2-TP card holder is designed to enable access after inserting a transponder card into a slot at the top of the device. It is powered by SELV voltage via KNX bus and requires an auxiliary power supply of 12–24 Vac or 12–32 Vdc. Available in white or black, it is compatible with the Form, Flank, 'NF, Deep and Surface versions with a 60 mm window, for perfect aesthetic integration in any environment.

Technical data
  • 13.56 MHz RFID card reader
  • 2 relay outputs (5A)
  • 2 inputs for potential-free contacts
  • 21-30 Vdc power supply via KNX bus
  • 12-30 Vdc SELV auxiliary power supply and 20mA@30Vdc current consumption
  • 1 red LED, 1 green LED, 1 RGB LED
  • KNX Data Secure protocol support
Delivery

The delivery includes a terminal for connection to the bus line, a plastic bracket for mounting on round or square boxes (hole centre distance 60 mm) and two pairs of screws.

Accessories
  • EK-TCE-10 smart card (Ekinex® logo in black, pack of 10 cards) or EK-TCC-10 (customised with customer logo, on request)
  • square frame, Form or Flank version
  • square plate with 60 x 60 mm window
  • plastic adapter
Versions
  • EK-TI2-TP-B (nero)
  • EK-TI2-TP-W (white): COMING SOON

Functions / Features
  • Signalling LED
    DND signalling with red LED and screen printing
    MUR signalling with green LED and screen printing
    Freely programmable generic signalling with RGB LED
  • RFID card reader
  • Loaded contacts
  • Aux OUT contact
  • Input for external DND button
  • Input for external MUR button
  • KNX Secure protocol
  • Plastic housing
  • Connection to bus line via KNX terminal
  • Flush-mounted installation in round/square box
  • IP20 protection rating (installed)
  • Climate classification 3K5 (indoor use, dry) and mechanical classification 3M2 (according to EN50491-2)
  • Dimensions: 80 x 80 x 41 mm
  • Weight approx. 50 g (with mounting bracket)
Configurationa and commissioning

To configure the device parameters, the corresponding application programme or the entire ekinex® product database must be loaded into the ETS® programme.

For detailed information on configuration options, refer to the device application manual.

Note. The physical address programming and automation functions are carried out using the ETS software. To implement the specific access control functions for the reader and pocket and to programme the cards, you must use the ekinex® accédo software.

The following steps are required to commission the device:

  • make the electrical connections as described above
  • supply voltage to the KNX bus
  • activate the 12/24 Vac/dc auxiliary power supply
  • switch the device to programming mode by pressing the button on the left side of the device (when viewed from the front). In this operating mode, the programming LED is lit
  • download the physical address and configuration to the device using the ETS® programme

Note. Unlike other KNX devices, programming with ETS is only possible if both the bus power supply and the 12/24 Vac/dc auxiliary power supply are provided

Do you want to configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner
STEKTO2TI2TP_EN
  • v. 2.5 (19/05/2026)
  • PDF | 1,5 MB
  • Download
FISPTOTI2TPIEX01
  • v. 2.0 (19/05/2026)
  • PDF | 2,2 MB
  • Download
MAEKTIO2TP_EN
  • v. 2.0 (19/05/2026)
  • PDF | 3,9 MB
  • Download
APEKTX2TP02
  • v. 2.0 (26/05/2026)
  • KNXPROD | 623,8 KB
  • Download
CEEKTX2TP
  • v. 1.0 (18/12/2025)
  • PDF | 891,3 KB
  • Download
UKCADCEKTX2TP
  • v. 1.0 (18/12/2025)
  • PDF | 422,9 KB
  • Download
EK-TX2-TP_FW_v.2.0.0_upgrade
  • v. 2.0.0 (08/05/2026)
  • ZIP | 7,8 MB
  • Download
DQEKTI2TP
close
Questo sito o gli strumenti terzi da questo utilizzati si avvalgono di cookie necessari al funzionamento ed utili alle finalità illustrate nella cookie policy. Se vuoi saperne di piú o negare il consenso a tutti o ad alcuni cookie, consulta la sezione cookies. Chiudendo questo banner, scorrendo questa pagina, cliccando su un link o proseguendo la navigazione in altra maniera, acconsenti all'uso dei cookie.