Under Bed Lift TV

The EK-BTV-BL TV lift is designed and constructed to move a TV set under the bed. The product in the resting state is placed under the bed; by operating a wired control, the sliding motorised lift brings the TV set into the in-use state. The transition between the two states of rest/use takes place by means of three movements actuated by three electric motors:

Horizontal translation (the TV comes out from under the bed);
Rotation (the TV is brought to a vertical position);
Lifting (the TV is raised to the height pre-set during installation).

Technical Data

• Dimensions in rest position (without TV): 1574 x 680 x 221 mm
• Maximum dimensions (without TV): 1930 x 680 x 1740 mm
• Mass (without TV): 80 kg
• Cycle time: 25-28 s

Power supply

• Voltage: 230 V ± 10%
• Frequency: 50 Hz ± 2%
• Current: 1.6 A
• Total installed power: 150 W
• Required protection: IP20

Technical data - Television

• Minimum screen size: 32"
• Maximum screen size: 55"
• Minimum space between TV and bed frame above: 50 mm
• Maximum weight: 25 kg

Environmental operating conditions

• Closed and dry, domestic environment
• Ambient temperature: 5÷40 °C
• Relative humidity: 30÷50 % (without condensation)
• Salinity: Excluded
• Solar radiation: No
• Vibration: No

Transport and storage environmental conditions

• Closed and dry environment
• Ambient temperature: -25÷55 °C
• Relative humidity: 10÷80 % (non-condensing)
• Salinity: Excluded
• Solar radiation: No
• Vibration: No
• Water and oil splashes, projection of material and substances from nearby machines: No