Basic Pushbutton (NO LED) and socket point for 2-fold plate (60x55 mm module) - FR USB

The 4-fold pushbutton of Ekinex® 71 series commands loads on/off switching, controls the dimming of lighting devices, controls motor drives for shutters or executes any other programmable command and control function. The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is supplied by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.

Technical data

• 30 Vdc power supply by KNX bus
• Current consumption from bus < 15 mA

Delivery

Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

• set of 1 square rocker, 2 vertical rectangular rockers, 4 square rockers or 4 horizontal rectangular rockers 
• double frame Form or Flank version
• double plate with 60 x 55 mm window
• a plastic adapter
• metal support for installation onto round or square mounting box (fixing holes 71  mm apart)

Socket point

The Ekinex EK-PWS-USB-FR is an E-type wall-mounting device for the supply of domestic appliances up to 16 A 250 V ~. The model is equipped with a USB power supply unit, both type-A and type-C, for charging mobile phones and generally all electronic devices that can be charged via USB sockets of the same type. Charging of two devices at the same time is allowed.