4 fold RGBW Led dimmer

DIN-Rail mount modules

CODE: EK-GC1-TP

Description

The Ekinex® EK-GC1-TP 4-fold RGBW LED dimmer allows to regulate independently the light intensity emitted by 4 LED strips at 12/24 Vdc or, alternatively, to regulate the light intensity and the colour emitted by a RGB or RGBW LED strip. The device is suitable for use with LED strips powered at constant voltage. The selection of the colour can be made optionally in HSV or RGB mode. Scenarios, predefined sequences, sequence repetition and random functions are available; the dimming speed and the holding time are programmable. The device is fitted with membrane pushbuttons for manual command and LEDs for status indication; a pushbutton allows the switching between automatic or manual operation modes. The device integrates a KNX bus communication module and is realised for mounting on a standard 35 mm DIN-rail. The device is powered by the KNX bus and requires an additional 12...30 Vdc to supply the controlled loads.

Technical data
Power supply
  • Voltage (strip LED): max 30 Vdc, 16 A
  • Voltage (control): 30 Vdc by KNX bus
Outputs
  • Number: 4
  • Load current for each channel: 4 A
Delivery
Delivery includes a terminal block for connection to the bus.
Functions / Features
  • Plastic casing
  • Frontal programming pushbutton and LED
  • Membrane keyboard with LEDs for status indication of outputs
  • Pushbutton for switching operating mode (normal / programming)
  • CH pushbutton for individual or simultaneous channels control
  • HSV / RGB pushbutton colour control mode
  • Auxiliary dry contact to disconnect load power supply during standby
  • Connection to bus line with KNX terminal block
  • Connection of outputs and 12-30 Vdc power supply with screw terminals
  • Installation on 35 mm rail (according to EN 60715)
  • 4 modular units (1 MU = 18 mm)
  • IP20 protection degree (installed device)
Configurationa and commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKGC1TP##.knxprod (## = release).

STEKGC1TP_EN_EKINEX_SPA
FISPGC1TPIEXX00_EKINEX_SPA
MAEKGC1GF1TP_EN - Release-v1.2
APEKGC1TP
  • v. 02 (11/09/2024)
  • ZIP | 328,3 KB
  • Download
CEEKGC1TP
  • v. 1.0 (30/01/2019)
  • PDF | 260,5 KB
  • Download
KNX_Certification_EK-GC1-TP
  • v. 0.2 (09/09/2024)
  • PDF | 770,5 KB
  • Download
DSEKGC1TP
close
Questo sito o gli strumenti terzi da questo utilizzati si avvalgono di cookie necessari al funzionamento ed utili alle finalità illustrate nella cookie policy. Se vuoi saperne di piú o negare il consenso a tutti o ad alcuni cookie, consulta la sezione cookies. Chiudendo questo banner, scorrendo questa pagina, cliccando su un link o proseguendo la navigazione in altra maniera, acconsenti all'uso dei cookie.