CODE: EK-GD2-DL-1-L-01
The EK-GD2-DL-1-L-01 device is a very low voltage 12, 24 and 48Vdc PWM dimmer suitable for controlling LED strips and PWM dimmable LED loads. The dimmer can be controlled via DALI1 or DALI2 bus, push-button control (N/O - normally open) at mains voltage or 12/24/ 48 V mains voltage, 0-10V or 1-10V analogue signal from an active actuator (which generates a variable voltage between 0 and 10V) or passive actuator, 47kW linear potentiometer or presence sensor. The operating modes of the EK-GD2-DL-1-L-01 dimmer can be selected via onboard dip-switches.
The graph shows the phenomenon of flickering as a function of frequency, measured across the entire dimming range. The results show the low-risk zone (yellow) and the zone with no observable effect (green). Defined by IEEE 1789-20156.
.svg)
.svg)
The assembly, electrical connection, configuration and commissioning of the device may only be carried out by qualified personnel in compliance with the applicable technical standards and laws in force in the respective countries.
.png)
