Multisensor T - U.R. - CO2 eq. and 8-fold pushbutton with backlit text/symbols and proximity sensor for 2-fold plate

The Ekinex® multisensor 71 series detects values of temperature, relative humidity and CO2 equivalent concentration in an air mass. The device can act as a temperature regulator of a room or zone; it can also perform the regulation by thresholds of relative humidity and CO2 concentration. The frontal LEDs indicate if the device is in heating, cooling, dehumidification or CO2 threshold mode. The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is supplied by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.

Technical data

• 30 Vdc power supply by KNX bus
• Current consumption from bus < 13 mA

Delivery

Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.

Pushbutton

The Ekinex® 20venti series 8-fold pushbutton is used for on/off control of utility devices, dimming of luminaires, control of motorized drives for roller shutters or other programmable control functions. Thanks to the integrated temperature sensor, the button can act as a temperature controller for a room or zone. RGB LED for each rocker. The switch has an integrated KNX bus communication module and is designed for installation in a flush-mounted wall box.

Technical data

• 30 Vdc power supply by KNX bus
• Current consumption from bus < 17 mA

Delivery

Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

• 1 full front cover with 60 x 60 mm modularity
• 8 rectangular 30 x 15 mm plastic rockers with or without backlit text/symbol
• double plate of the Deep and Surface version with 60 x 60 mm window
• a plastic adapter
• a metal support for installation onto round or square mounting box (fixing holes 71 mm apart)