Air quality multisensor with regulator and 8-fold pushbutton with backlit text/symbols and proximity sensor for 2-fold plate

The Ekinex® multisensor with controller is a KNX S-mode device for independent temperature control of a room or building area. The module includes 3 sensors: temperature, humidity percentage and air quality, expressed in terms of TVOC (Total Volatile Organic Compounds) or CO2 equivalent. It can also function as a controller for these three quantities, valid for a single zone to be controlled. The front LEDs indicate the heating, cooling, dehumidification, humidification and TVOC or CO2 threshold status. The push-button and the programming LED are located on the front in the area below the button. The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is supplied by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.

Technical data

• 30 Vdc power supply by KNX bus
• Current consumption from bus < 13 mA
• Max. bus power < 390 mW

Delivery

Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.

Pushbutton

The Ekinex® 20venti series 8-fold pushbutton is used for on/off control of utility devices, dimming of luminaires, control of motorized drives for roller shutters or other programmable control functions. Thanks to the integrated temperature sensor, the button can act as a temperature controller for a room or zone. RGB LED for each rocker. The switch has an integrated KNX bus communication module and is designed for installation in a flush-mounted wall box.

Technical data

• 30 Vdc power supply by KNX bus
• Current consumption from bus < 17 mA

Delivery

Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

• 1 full front cover with 60 x 60 mm modularity
• 8 rectangular 30 x 15 mm plastic rockers with or without backlit text/symbol
• double plate of the Deep and Surface version with 60 x 60 mm window
• a plastic adapter
• a metal support for installation onto round or square mounting box (fixing holes 71 mm apart)